Bathroom Remodeling in Kyle, TX
Tile, walls, fixtures and finishes built to handle daily moisture, so the bathroom you pay for still looks good in ten years.
- Moisture-ready walls
- Nearly 25 years in construction
- Kyle, TX based
Bathrooms fail from the inside out
Bathrooms punish shortcuts. Steam, splashes and standing water get into every gap, and what you cannot see behind the tile decides how long the room lasts. Standard drywall around a shower or tub swells and crumbles in a few years, which is why wet areas call for cement board or another moisture-resistant backer under a proper waterproofing layer, not paint over regular board.
In houses around Kyle, bathrooms often have two quiet problems that a remodel can fix. The first is ventilation. An exhaust fan that is undersized, or that dumps moist air into the attic instead of outside, keeps walls and ceilings damp and breeds mold. The second is the water itself. Central Texas has hard water, and it leaves scale on glass, fixtures and grout faster than people expect, so materials and finishes should be chosen with that in mind.
Layout matters too. On a slab foundation, moving a toilet, tub or shower drain means cutting concrete, so many good bathroom remodels keep fixtures where they are and improve everything around them. Wall repair, drywall finishing and paint are handled by the same crew.
Signs your bathroom needs more than a refresh
- Grout is cracked or missing, or tiles sound hollow when tapped.
- Walls near the tub or shower feel soft, bubble or show dark stains.
- Paint peels on the ceiling, or mildew returns soon after cleaning.
- The floor flexes around the toilet or tub, which can point to hidden water damage.
- The tub or shower is worn, stained or leaking at the edges.
- The layout is cramped and you want a walk-in shower or a double vanity.
How a bathroom remodel is done
- Inspect for hidden damage. Before design decisions are final, tile and walls near water are checked for soft spots, since damage found later changes the budget.
- Demolish and rough in. Fixtures, tile and damaged board come out. Plumbing and electrical changes that require a state-licensed professional are handled by one.
- Build the wet areas. Cement board or an equivalent backer goes in around the shower or tub, followed by a waterproofing membrane that is tested before tile.
- Close and finish the dry walls. Moisture-resistant drywall is hung on the rest of the room, taped, finished and primed with a mildew-resistant primer.
- Tile, set fixtures, finish. Tile, vanity, toilet, fixtures and trim go in, and the room is walked through with you at the end.
What affects the price of a bathroom remodel
Bathroom size does not tell you the cost. A small bathroom with a full tile shower can cost more than a larger one with a simple tub surround. These are the factors that matter:
- Shower or tub work. A full tiled shower with waterproofing is the largest single item in most bathrooms.
- Tile choice and pattern. Large-format, mosaic and patterned tile differ in material and labor.
- Moving fixtures. Relocating drains on a slab adds concrete cutting and repair.
- Hidden damage. Rotted subfloor or wet framing found at demolition adds repair work.
- Ventilation and electrical. A properly sized, outside-vented fan and updated lighting add to the scope.
Why homeowners choose us for bathrooms
Most failed bathrooms fail in the wall behind the tile. Years in construction and remodeling teach you to build the wet areas first and the pretty part last, and as drywall is the heart of the company, the walls behind the finish get proper attention.
If you suspect hidden water damage, say so when you call (512) 227-7360 so it can be checked before plans are set.
Where we remodel bathrooms
We remodel bathrooms in Kyle and in San Marcos, where rental and older family homes often have tubs and walls well past their prime.
Bathroom remodeling questions
Can I use regular drywall in a bathroom?
On ceilings and walls outside the wet zone, moisture-resistant drywall is a sensible upgrade. Inside the shower or around a tub, regular drywall is not suitable, and cement board with a waterproofing layer is the right backer for tile.
How long does a bathroom remodel take?
A full remodel usually takes a couple of weeks or more, because waterproofing and tile setting need cure time. A simple update goes faster, and hidden damage found at demolition can extend the schedule.
Why does my bathroom keep growing mildew?
Usually from poor ventilation. An exhaust fan that is too small, runs too briefly, or vents into the attic keeps moisture in the room. Fixing the fan and venting it outside often does more than repainting.
Can you convert my tub to a walk-in shower?
Often yes, though the drain location and slab matter. We would look at the existing plumbing and framing before promising a layout.
Will hard water affect my new bathroom?
Hard water leaves scale on glass, fixtures and grout. Sealed grout, simple finishes and a squeegee habit help, and some homeowners add a water softener. It is worth planning for before choosing materials.
More from our remodeling team
Part of our Remodeling & Construction work.
Ready to plan your bathroom?
Call or send a few details about the room and we will talk through next steps.